Stepper Medium Speed Wire Cut Machine Lk-400
2. The machine tool adopts high-precision linear guide rail, which can realize high-sensitivity transmission accuracy and ensure the machining accuracy of the workpiece (within 0.008mm). The wire frame adopts the most advanced C-type structure, which greatly improves the operation accuracy of the machine tool and the cutting accuracy is close to that of slow wire walking.
3. The finish (1.0) imitates the slow wire walking model, with exquisite appearance. The main machine is of "C" type, with good structural rigidity, firmness and stability. The screw rod is double nut precision screw rod
4. The heavy hammer wire tightening device adopts linear guide rail to ensure the verticality of wire tightening, which solves the two problems of unstable mercerization and poor surface quality. After cutting for a period of time, the tightness of each section of molybdenum wire is inconsistent, the molybdenum wire vibrates, and the surface finish produces stripes and waves. The automatic constant tension device can ensure the consistent tightness of molybdenum wire anytime and anywhere, and truly realize stripless and efficient cutting.
5. Taiwan Shangyin linear guide rail has very good sealing and stability to ensure the long-term stability of the whole machine.
6. Automatic lifting of spindle to improve production efficiency and ensure mechanical quality;
7. Long life gem guide wheel: ensure stable wire transportation, long life and durability;
8. High standard installation and high-precision instrument detection (such as laser interferometer) ensure that the positioning accuracy, vertical positioning accuracy, parallelism and perpendicularity of guide rail fully meet the national standards.
9. The water tank adopts the design of high-pressure multistage filtration system imitating the slow wire water tank. The water tank is divided into three water tanks. The sewage flows into the primary filtration water tank, flows to the intermediate filtration water tank after sedimentation filtration, and then flows to the third US level water tank. The utility model realizes the independent isolation of water purification and sewage, and can realize environmental protection and water saving without changing water for a long time.
1. Ensure that when the worktable moves in the X / Y direction, it will not exceed the range of the base, especially when the user processes heavy workpieces, and ensure that the deformation of the supporting plate is greatly reduced during the machining process of the machine tool workpieces.
2. The long axis of the support plate is lower and the center of gravity is lower.
3. Brand linear guide rail is adopted for wire transportation, and the guide rail span is increased, the operation is more reliable and the service life is longer.
4. The lifting stroke of Z axis can reach 300mm.
5. The lubricating oil circuit is separated from the cooling water circuit. The waste lubricating oil generated by the machine tool is directly discharged into a separate oil tank to avoid pollution by flowing into the water tank containing emulsion.
Technical Parameter
|
Equipmenttype |
Unit |
TAT-400 |
Fuselage |
HostSize(Length*Width*Height) |
mm |
1700*1300*2160 |
Totalweight |
kg |
1500 |
|
Workbench |
Workbenchsize(width*length) |
mm |
740*460 |
Travel |
X-axistravel |
mm |
320 |
Y-axistravel |
mm |
400 |
|
Z-axistravel |
mm |
300 |
|
CNCPowerSupply |
Pulsewidth |
us |
1-250 |
Wirespeed |
|
0-3 |
|
Cuttingnumber |
time |
1-7 |
|
MiniMechanicalDrivingEquivalent |
um |
1 |
|
PulseResolution |
um |
0.4 |
|
Processing capacity |
Spindlestroke(electricallyadjustable) |
mm |
250 |
Max.cuttingslope/workpiecethickness |
|
630/80mm |
|
Max.BearingCapacityofWorkbench |
kg |
300 |
|
Machining accuracy |
LocationaccuracyX/Y |
mm |
0.01 |
RepeatedpositioningaccuracyX/Y |
mm |
0.005 |
|
Multi-toolCuttingAccuracy |
mm |
0.005(40mm,Cutoneandrepair two. MaterialSKD11orCr12,HRC58) |
|
OptimumSurfaceRoughness |
um |
Ra1.0(MaterialSKD11 or Cr12,HRC58) |
|
|
Maximumcuttingefficiency |
mmmin |
220 |
Commoncuttingefficiency |
mmmin |
140 |
|
Max.ProcessingCurrent |
A |
6-8 |
|
Processing efficiency |
No-loadVoltageofMachiningPowerSupply |
V |
100 |
Powerconsumption |
kw |
2.3 |
|
Wire traveling system |
Electrodewirediameter |
mm |
0.12-0.2 |
Wirebarreltravelingspeed |
|
frequencycontrol |
|
Tighteningmethod |
|
Two-wayautomatictightening |
|
Wiretravellingspeed |
m/s |
3-12 |
|
Working groove |
Filtrationaccuracy |
um |
10 |
Filtrationmode |
|
Slow-WalkingFiltration |
|
Workingfluid |
|
Specialcuttingfluid |
|
Environment andelectricity |
Electricpower |
|
380V10%/50/60Hz/2kVA |
Temperature |
|
T15-30/humidity40-80% |
|
Pressure |
kpa |
86-106kpa |
SUZHOU LONGKAI ELECTROMECHANICAL TECHNOLOGY CO.,LTD.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |